TILTROTATORS
The excavator’s swivel arm head proves its worth wherever the excavator’s operating space is limited, acting as its pivot. Simultaneous rotation and pivoting, it ensures maximum manoeuverability of the attachments used. The elimination of excavator travel and manual work, further increases the cost-effectiveness of the site, while reducing fuel consumption.
TRANSLOCATED CONSTRUCTION
No load restriction in extreme operation due to retractable swivel head
PRECIOUS POSITIONING
Low construction height allows high manoeuverability during operation
HIGH POWER IN EVERY POSITION
Rotary actuator provides extremely high torque and high speed
EXTREME ROTARY TORQUE
Robust gearbox guarantees high efficiency and highest torque
MAXIMUM SAFETY
Locking assistant avoids errors during tool changes
LONG LIFETIME
Reduces wear by putting tools away when needed
HIGHEST POSSIBLE DAMAGE PROTECTION
Elimination of loose hydraulic hoses eliminates common trouble spots
MINIMUM FUEL CONSUMPTION
Low unladen weight and layered design allow reduce unnecessary fuel consumption
TOTAL HYDRAULIC TOOL CHANGE
Optional electrical connector allows fully hydraulic implement changeover without leaving the cab
EASY MAINTENANCE
Low maintenance due to good accessibility
MAXIMUM WORKING SPACE
Internal rotary cylinder has eliminated sensitive hydraulic cylinders and maintenance due to good accessibility
VERSATILITY OF APPLICATION
The swivel head can be used in a number of ways:
Excavation and material batching, sub-excavation and embankment work, backfilling and foundation work.
Underground infrastructure construction
Excavation of embankments, trenches. Uncovering of pipes running across, pipe laying, backfilling.
Road construction in built-up areas
Material placement, surface modelling and embankments.
Greater freedom of manoeuver for the accessories used
The high agility of the “pivot” at the end of the arm allows precise positioning of the additional equipment without having to reposition the excavator.
Quick and easy change
Once work is complete, the rotating head can be disconnected by the operator in a matter of seconds via a hydraulic quick coupler for fitting to another piece of equipment.
TECHNICAL SPECIFICATIONS:
| ADAPTATION PLATE | ROTARY HEAD TYPES | TR 10 | TR 18 | TR 22 | TR 28 |
|---|---|---|---|---|---|
 |
OQ45 | ✓ | – | – | – |
| OQ60-5 | – | ✓ | – | – | |
| OQ65 | – | ✓ | ✓ | ✓ | |
| OQ70 | – | – | ✓ | ✓ | |
| OQ70/55 | – | – | ✓ | ✓ | |
| Likufix SW33 | – | ✓ | – | – | |
| Likufix SW48 | – | – | ✓ | ✓ |
| TILTROTATOR (Swivel-rotary head) |
SIZE OF EXCAVATOR (TON) | 8-12 | 12-18 | 16-22 | 22-28 |
|---|---|---|---|---|---|
 |
MTS-NAVI | ✓ | ✓ | ✓ | ✓ |
| MTS-SAVETY | ✓ | ✓ | ✓ | ✓ | |
| Hydr. rotary switch, triple | – | ✓ | ✓ | ✓ | |
| DIMENSIONS | |||||
| Length [mm] | 695 | 740 | 780 | 970 | |
| Width [mm] | 455 | 495 | 560 | 640 | |
| Height / distance of pins | depending on the system used | ||||
| Mass from [kg] | 340 | 560 | 650 | 750 | |
| Swing angle [°] | 2×40 | 2×40 | 2×40 | 2×40 | |
| Breaking load [kNm] | 80 | 130 | 150 | 180 | |
| Leaning moment [kNm] | 20 | 26 | 35 | 35 | |
| Torque [kNm] | 52 | 52 | 52 | 67 | |
| Speed [rpm] at 70 l/min | 9 | 12 | 12 | 12 | |
| Working pressure [bar] | 250 | 250 | 250 | 250 | |
| TOOLS | OQ45 | OQ60-5 | OQ65 | OQ70 | OQ70/55 | LIKUFIX SW22 | LIKUFIX SW40 | ||
|---|---|---|---|---|---|---|---|---|---|
| PALLET FORKS |  |
TK: 0.8 t | ✓ | ✓ | ✓ | – | – | ✓ | – |
| ZL: 80 cm | |||||||||
| TK: 2 tons | – | – | – | ✓ | ✓ | – | ✓ | ||
| ZL: 120 cm | |||||||||
| GRAB BUCKET |  |
width 40 cm | – | ✓ | ✓ | ✓ | ✓ | – | – |
| width 60 cm | – | – | – | ✓ | ✓ | – | – | ||
| TILT BUCKET |  |
1200 | ✓ | – | – | – | – | – | – |
| 1400 | – | ✓ | – | ✓ | ✓ | ✓ | – | ||
| 1500 | – | ✓ | – | ✓ | ✓ | ✓ | ✓ | ||
| 1600 | – | – | – | ✓ | ✓ | – | ✓ | ||
| 1800 | – | – | – | ✓ | ✓ | – | ✓ | ||
REPLACE THE MODULE INSTEAD OF THE ACCESSORY!
TOOL OPTIONS
The swivel head allows other tools (pallet forks and grapple) to be attached and controlled.
QUICK-CONNECT OPTIONS
The swivel head is suitable for OilQuick couplings from model OQ45 to OQ80 and Likufix SW33 and SW48